To prevent the liner from showing when water is in the pond, choose from the following two edging finishes:
 
1. Dig an edging shelf twice the depth of your stone. Make sure the liner is large enough to cover the additional ledge. Place the first layer of stone, wrap the liner behind and over the layer, trim, and place the second layer of stone on top. The water level can go as high as the middle of the first layer of stone.
 
2. Dig an edging shelf the depth and width of the stone you want to use. Make sure the liner is large enough to allow for this additional ledge. Lay the first layer of stone, and then lay the second layer of stone above it. The water level can go as high as the middle of the first layer of stone.
 

FOR PRICING AND FURTHER INFORMATION, VIEW OUR ONLINE CATALOGUE HERE.

Web Administrator - Isa Webb.
Last Updated: Monday February 22, 2010